Read Only Portal

Portal for read-only access to national adoptions of specific harmonized European standards for European public access.

The purpose of this webportal is to enable European public access to documents for specific harmonized European standards (national adoption).

The present access to the standards is granted under applicable legal frameworks. Please note that these frameworks can change and may impact your access.

Standards are protected by copyright.

CEN and CENELEC Standards documents, their national adoptions and other technical related deliverables and publications are covered and protected by copyright.

The present access to national adoptions of harmonized European standards is granted for direct information of the registered user only and under read-only format, without any right to download, print, commercialize, reproduce, make available or distribute the documents in any way whatsoever, except if authorised by law (e.g. via a copyright exception). We reserve all rights concerning text and data mining.

Such access is granted without prejudice to any existing rights of the rightsholders of these documents which are hereby withheld, and to rules on copyright which may limit a third party's right to reproduce or exploit the standards.

By using the portal you are confirming to have read the above. Read more about copyright from CEN and CENELEC.

What is a harmonized European standard?

A harmonized European standard is a European standard developed by a recognized European Standards Organization, and is created following a request from the European Commission for the implementation of the application of European Union harmonization legislation.

Content available via the Read Only Portal

The Danish portal can be accessed here: https://webshop.ds.dk/en/standard?openStandards=true

The portal enables access to the following standards:

  • DS/EN 1:1998 – Flued oil stoves with vaporizing burners
  • DS/EN 1/A1:2007 – Flued oil stoves with vaporizing burners
  • DS/EN 40-4/AC:2006 – Lighting columns – Part 4: Requirements for reinforced and prestressed concrete lighting columns
  • DS/EN 40-4:2006 – Lighting columns – Part 4: Requirements for reinforced and prestressed concrete lighting columns
  • DS/EN 54-25/AC:2010 – Fire detection and fire alarm systems – Part 25: Components using radio links
  • DS/EN 54-25/AC:2012 – Fire detection and fire alarm systems – Part 25: Components using radio links
  • DS/EN 54-25:2008 – Fire detection and fire alarm systems – Part 25: Components using radio links
  • DS/EN 71-12:2013 – Safety of toys – Part 12: N-Nitrosamines and N-nitrosatable substances
  • DS/EN 71-4:2013 – Safety of toys – Part 4: Experimental sets for chemistry and related activities
  • DS/EN 71-5:2015 – Safety of toys – Part 5: Chemical toys (sets) other than experimental sets
  • DS/EN 285:2015+A1:2021 – Sterilization – Steam sterilizers – Large sterilizers
  • DS/EN 303-5:2021+A1:2022 – Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking
  • DS/EN 349 + A1:2008 – Safety of machinery – Minimum gaps to avoid crushing of parts of the human body
  • DS/EN 474-1:2022 – Earth-moving machinery – Safety – Part 1: General requirements
  • DS/EN 492:2012+A2:2018 – Fibre-cement slates and fittings – Product specification and test methods
  • DS/EN 619:2022 – Continuous handling equipment and systems – Safety requirements for equipment for mechanical handling of unit loads
  • DS/EN 620:2021 – Continuous handling equipment and systems – Safety requirements for fixed belt conveyors for bulk materials
  • DS/EN 894-1 + A1:2008 – Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 1: General principles for human interactions with displays and control actuators
  • DS/EN 894-2 + A1:2008 – Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 2: Displays
  • DS/EN 894-3 + A1:2008 – Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 3: Control actuators
  • DS/EN 894-4:2010 – Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 4: Location and arrangement of displays and control actuators
  • DS/EN 1789:2020 – Medical vehicles and their equipment – Road ambulances
  • DS/EN 1810:2000 – Body-piercing post assemblies – Reference test method for determination of nickel content by flame atomic absorption spectrometry
  • DS/EN 1811:2023 – Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
  • DS/EN 1837:2020 – Safety of machinery – Integral lighting of machines
  • DS/EN 10216-5:2021 – Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 5: Stainless steel tubes
  • DS/EN 10222-5:2017 – Steel forgings for pressure purposes – Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
  • DS/EN 10272:2016 – Stainless steel bars for pressure purposes
  • DS/EN 1090-1 + A1:2012 – Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
  • DS/EN 12385-1 + A1:2008 – Steel wire ropes – Safety – Part 1: General requirements
  • DS/EN 12453:2017+A1:2021 – Industrial, commercial and garage doors and gates – Safety in use of power operated doors – Requirements and test methods
  • DS/EN 12467:2012+A2:2018 – Fibre-cement flat sheets – Product specification and test methods
  • DS/EN 12472 + A1:2009 – Method for the simulation of wear and corrosion for the detection of nickel release from coated items
  • DS/EN 12472:2020 – Method for the simulation of accelerated wear and corrosion for the detection of nickel release from coated items
  • DS/EN 12547:2014 – Centrifuges – Common safety requirements
  • DS/EN 12644-1 + A1:2008 – Cranes – Information for use and testing – Part 1: Instructions
  • DS/EN 12644-2 + A1:2008 – Cranes – Information for use and testing – Part 2: Marking
  • DS/EN 12978 + A1:2009 – Industrial, commercial and garage doors and gates – Safety devices for power operated doors and gates – Requirements and test methods
  • DS/EN 13001-1:2015 – Cranes – General design – Part 1: General principles and requirements
  • DS/EN 13135:2013+A1:2018 – Cranes – Safety – Design – Requirements for equipment
  • DS/EN 13155 + A2:2009 – Cranes – Safety – Non-fixed load lifting attachments
  • DS/EN 13155/A1:2005 – Cranes – Non-fixed load lifting attachments
  • DS/EN 1337-3:2005 – Structural bearings – Part 3: Elastomeric bearings
  • DS/EN 13445-1:2021 – Unfired pressure vessels – Part 1: General
  • DS/EN 13445-2:2021 – Unfired pressure vessels – Part 2: Materials
  • DS/EN 13445-3:2021 – Unfired pressure vessels – Part 3: Design
  • DS/EN 13445-4:2021 – Unfired pressure vessels – Part 4: Fabrication
  • DS/EN 13445-5:2021 – Unfired pressure vessels – Part 5: Inspection and testing
  • DS/EN 13445-8:2021 – Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
  • DS/EN 13480-1:2017 – Metallic industrial piping – Part 1: General
  • DS/EN 13480-1:2017/A1:2019 – Metallic industrial piping – Part 1: General
  • DS/EN 13480-2:2017 – Metallic industrial piping – Part 2: Materials
  • DS/EN 13480-2:2017/A1:2018 – Metallic industrial piping – Part 2: Materials
  • DS/EN 13480-2:2017/A2:2018 – Metallic industrial piping – Part 2: Materials
  • DS/EN 13480-2:2017/A3:2018 – Metallic industrial piping – Part 2: Materials
  • DS/EN 13480-2:2017/A7:2020 – Metallic industrial piping – Part 2: Materials
  • DS/EN 13480-2:2017/A8:2021 – Metallic industrial piping – Part 2: Materials
  • DS/EN 13480-3:2017 – Metallic industrial piping – Part 3: Design and calculation
  • DS/EN 13480-3:2017/A1:2021 – Metallic industrial piping – Part 3: Design and calculation
  • DS/EN 13480-3:2017/A2:2020 – Metallic industrial piping – Part 3: Design and calculation
  • DS/EN 13480-3:2017/A3:2020 – Metallic industrial piping – Part 3: Design and calculation
  • DS/EN 13480-3:2017/A4:2021 – Metallic industrial piping – Part 3: Design and calculation
  • DS/EN 13480-4/A1:2013 – Metallic industrial piping – Part 4: Fabrication and installation
  • DS/EN 13480-4:2012 – Metallic industrial piping – Part 4: Fabrication and installation
  • DS/EN 13480-4:2012/A2:2015 – Metallic industrial piping – Part 4: Fabrication and installation
  • DS/EN 13480-5:2017 – Metallic industrial piping – Part 5: Inspection and testing
  • DS/EN 13480-5:2017/A1:2019 – Metallic industrial piping – Part 5: Inspection and testing
  • DS/EN 13480-5:2017/A2:2021 – Metallic industrial piping – Part 5: Inspection and testing
  • DS/EN 13480-6:2017 – Metallic industrial piping – Part 6: Additional requirements for buried piping
  • DS/EN 13480-6:2017/A1:2019 – Metallic industrial piping – Part 6: Additional requirements for buried piping
  • DS/EN 13480-8:2017 – Metallic industrial piping – Part 8: Additional requirements for aluminium and aluminium alloy piping
  • DS/EN 13586:2020 – Cranes – Access
  • DS/EN 13852-1:2013 – Cranes – Offshore cranes – Part 1: General-purpose offshore cranes
  • DS/EN 13852-3:2021 – Cranes – Offshore cranes – Part 3: Light offshore cranes
  • DS/EN 13857-1:2003 – Explosives for civil uses – Part 1: Terminology
  • DS/EN 14351-1:2006+A2:2016 – Windows and doors – Product standard, performance characteristics – Part 1: Windows and external pedestrian doorsets
  • DS/EN 14509:2013 – Self-supporting double skin metal faced insulating panels – Factory made products – Specifications
  • DS/EN 14511-2:2013 – Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 2: Test conditions
  • DS/EN 14511-3:2013 – Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 3: Test methods
  • DS/EN 15011:2020 – Cranes – Bridge and gantry cranes
  • DS/EN 15056 + A1:2009 – Cranes – Requirements for container handling spreaders
  • DS/EN 16128:2015 – Ophthalmic optics – Reference method for the testing of spectacle frames and sunglasses for nickel release
  • DS/EN 16153:2013+A1:2015 – Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings – Requirements and test methods
  • DS/EN 16510-2-1:2022 – Residential solid fuel burning appliances – Part 2-1: Roomheaters
  • DS/EN 16931-1:2017 – Electronic invoicing – Part 1: Semantic data model of the core elements of an electronic invoice Access to this CEN and DS technical publication has been sponsored by the European Commisson
  • DS/CEN/TS 16931-2:2017 – Electronic invoicing – Part 2: List of syntaxes that comply with EN 16931-1. Access to this CEN and DS technical publication has been sponsored by the European Commisson
Contact us

Sales
Sales Do you have any questions, requests or comments? E: salg@ds.dk
T: +45 39966131